Manufacturing CPA in Ontario, starting with the first-year equipment deduction
A manufacturing CPA in Ontario for costing, inventory and tax. As at September 2026, qualifying manufacturing machinery is fully deductible in year one.
Normally a business deducts the cost of new equipment a bit at a time over many years, as a percentage of whatever cost is left, which the tax rules call capital cost allowance. As at September 2026, qualifying manufacturing and processing machinery and equipment can instead be written off in full in the first year. Not every machine qualifies, so it's worth checking before you buy.
Rundle works as the manufacturing accountant for owner-operated manufacturers and distributors. I look after product costing (working out what each product costs you to make), inventory, monthly accounting, HST, payroll and the corporate tax return (T2). Material costs are usually clear, while the full cost of each product takes more work to pin down, and it affects both what you charge and how much tax you pay. For a manufacturer without a finance lead, I provide the kind of numbers a larger manufacturer gets from its own finance department. I run a CPA firm in Mississauga, Ontario, working with clients across the Greater Toronto Area and the rest of Ontario over video and in cloud software. To start, send a short note about what you make, and a 20-minute call can follow if it helps.
What changed for manufacturing equipment in 2026?
Bill C-15 brought back the Accelerated Investment Incentive (a larger first-year deduction on many business assets) and full first-year expensing (deducting the whole cost in the first year) of manufacturing and processing machinery and equipment. The bill received Royal Assent, the step that makes it law, on 26 March 2026. It's deemed in force from 1 January 2025, so it reaches back to purchases made from that date. It covers property acquired after 2024 and available for use (broadly, ready to be put to work) before 2034, with a smaller first-year deduction as it phases down over 2030 to 2033.
The ordinary yearly rate for this machinery also dropped, from 50% for eligible machinery acquired after 2015 and before 2026 to 30% from 2026 (Class 53 and Class 43, in CRA's terms). That lower rate matters much less for purchases written off in full. The deduction can lower the corporation's taxable income in the first year and ease the cash cost of the purchase. Before you commit, I look at the timing and cash flow with you. Some government pages still show a phase-out schedule from before Bill C-15, so check the date on anything you read.
Is the 100% write-off for manufacturing buildings law in Canada yet?
The write-off for manufacturing buildings is proposed, not law. Budget 2025 proposes a 100% first-year deduction for eligible manufacturing or processing buildings, including eligible additions and alterations, where at least 90% of the floor space is used for it. It would cover property acquired on or after 4 November 2025 and first used for manufacturing or processing before 2030, with a smaller deduction for buildings first used from 2030 to 2033.
The measure wasn't in Bill C-15. As at September 2026, it sits in Bill C-31, which is at committee in the House of Commons and hasn't received Royal Assent. If you're planning to buy, build or expand a plant, it's safer not to count on the deduction, since it may not pass or may change before it does. I can run the numbers both ways, so you can see how much depends on it.
What goes into the full cost of a product?
A product's full cost is its materials plus labour, machine time and a share of overhead, which is the cost of running the plant that isn't tied to any one product. Measured against materials alone, a product can look more profitable than it is.
The costs that are easiest to miss are labour that isn't tracked to a job and machine time that isn't costed. Setup and changeover (switching a line between products) also use capacity and produce nothing. Scrap and rework use materials with no matching output, and overhead may be spread at a rate set for an earlier volume. Any of these can make a product line look profitable when it isn't, and the annual financial statements won't usually show it because they average everything together.
What helps is knowing the cost of each product or group of similar products, and each line's contribution margin. That's its sales minus the costs that rise as you make more of it, and it shows which lines earn enough to cover rent, salaries and other fixed costs. I can set up your monthly books to report margin by line and review the overhead rate whenever volume changes, so pricing and product decisions rest on real figures.
How does a manufacturer value inventory for tax?
The value you put on stock at year end feeds straight into profit. The cost of goods still on hand isn't deducted this year, so the higher that value, the higher your profit and tax.
The tax rules treat raw materials, work in progress (partly finished goods) and finished goods the same way. You value them at the lower of cost and fair market value (broadly, what the goods are worth now), or value the entire inventory at fair market value. Each year's opening value must match the previous year's closing value, and your method has to be used again the next year unless CRA agrees to a change.
The main question is how much production cost goes into stock. CRA accepts direct costing, which includes only the variable costs of production (those that rise and fall with output, including variable overhead). It also accepts absorption costing, which adds a share of fixed overhead such as plant rent. It doesn't accept prime costing, which leaves overhead out altogether, and whichever method you use has to give a fair picture of income.
Work in progress is where this matters most. Where it's meaningful and there's no method for valuing it, its year-end value is mostly an estimate that moves profit between years. I help you settle on a method and apply it consistently, turning your physical count into a value you can explain if CRA or your bank asks.
Can manufacturing process improvements qualify for SR&ED?
Scientific research and experimental development (SR&ED) is the federal tax credit program that covers part of what you spend on qualifying technical work. Developing a new production method or reaching a tolerance that wasn't achievable before can meet the test, even when the work happens on the shop floor.
CRA asks whether there was scientific or technological uncertainty, meaning the answer wasn't known or obvious from standard practice. It also asks whether the work was a systematic investigation by experiment or analysis, meaning you tested and adjusted methodically, and whether it sought a technological advancement. Ordinary commercial production, quality control and routine testing don't qualify.
A claim can fail for lack of records even when the work qualifies. It's due 18 months after the tax year end, and that deadline can't be extended. Notes made at the time (what CRA calls contemporaneous evidence) matter more than a later write-up. Keep a running note in the job file of what was tried, what failed and why. I can track the labour and materials spent on that work separately in your books, so the costs are clear if you claim. The SR&ED rates, limits and how grants reduce the credit are explained on the page for defence startups and apply to manufacturers too.
How do freight, exports and payroll affect a manufacturer's books?
The freight you pay to bring stock in belongs in the cost of that stock, not in the month's general expenses. Posting it as an expense distorts margin all year, and for a distributor it can make a whole product line look better or worse than it is. I record it with the stock it brought in.
Export sales are generally zero-rated, meaning taxed at 0%, which isn't the same as exempt. An exempt sale also carries no HST, but the seller can't claim back the HST it pays on its own costs. A plant selling entirely into the United States charges no HST on those sales. It still has to register once its sales, zero-rated ones included, pass the small supplier threshold (the level at which registration becomes compulsory). It can then claim back the HST it pays on business purchases, through what CRA calls input tax credits. Treating exports as exempt means never getting that HST back.
Manufacturing payroll carries shift premiums and overtime on top of the usual deductions. How often you send those deductions to CRA is generally set by how much you withheld two calendar years earlier. If staff track hours by job, I can assign that labour to the products it went into.
What does a manufacturing accountant at Rundle do?
Business advisory is help with specific decisions, worked through with your own numbers. For a manufacturer, that usually means pricing, product mix, which lines to keep, and whether a new machine is likely to pay for itself. I model the numbers with you first, so you can see the likely effect on profit and cash before you commit.
A fractional CFO is a senior finance person who works with you part time instead of as a full-time hire. That means reviewing results with you each month, planning cash around large purchases and orders, and preparing the figures your bank asks for when you need a loan. It matters most when you have to pay for materials or equipment well before your customers pay you.
Monthly accounting is the base for both. I keep the books each month, check them against your bank and card statements, and look after HST and payroll, product costing, and a consistent year-end inventory value. If your bank wants year-end financial statements, I prepare them from your records as compilations, which aren't audited or reviewed. If a lender needs an audit or a review, I refer that out.
Tax planning means looking at the tax effect of a decision before you make it, which for a manufacturer often means timing capital purchases against the expensing rules. The year closes with the corporate tax return (T2), the return your corporation files with CRA each year. It's prepared from the same books, so the equipment write-off and inventory value carry straight through.
Send a short note describing what you make, how you cost it now and what you'd like to sort out first. I aim to reply the same business day, and a 20-minute call can follow if it's easier to show me how you cost a product.
Send a short noteor call or text 416-450-7981
Common questions about equipment write-offs, costing and HST for manufacturers
Can I write off new manufacturing equipment in the first year?
New manufacturing and processing machinery and equipment that qualifies can be written off in full in the first year, as at September 2026. Bill C-15 brought this back for property acquired after 2024 and available for use before 2034, phasing down from 2030.
Is the manufacturing buildings write-off available yet?
The manufacturing buildings write-off isn't available yet, because it hasn't been passed into law. As at September 2026 it sits in Bill C-31, which hasn't received Royal Assent.
Do I have to use absorption costing for inventory?
Absorption costing isn't required, because CRA accepts both direct costing and absorption costing. It doesn't accept prime costing, which leaves overhead out of inventory altogether, and the method you choose has to give a fair picture of income and be used consistently.
Would my process improvements qualify for SR&ED?
Process improvements can qualify for SR&ED where the answer to a technical problem wasn't known or obvious from standard practice, you worked through it methodically, and the work sought a technological advancement. Work done on the shop floor can count, but ordinary commercial production doesn't. The claim is due 18 months after the tax year end, and that deadline can't be extended.
Do I have to register for HST if I only sell to the US?
A manufacturer exporting all its goods to the US still has to register for HST once its sales pass the small supplier threshold, because zero-rated export sales count toward it. Registering lets you claim back the HST you pay on business purchases such as materials and equipment.
Written by Rundle Accounting & Advisory, a CPA firm in Mississauga. About the firm. Last reviewed: 14 September 2026.
This page is general information about Canadian tax rules, not advice for your situation. The capital cost allowance and SR&ED rules referenced here changed materially in 2025 and 2026, and one measure described as proposed had not been enacted at the date above.